5NY5 - Gardiner, Gardiner, NY
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 5NY5
Latitude/Longitude: 41-40-00.3360N / 074-08-58.5230W
41.6667 / -74.1494
Elevation: 340 feet MSL (Estimated)
Magnetic Variation: 13W (1985)
Land Area Covered: 90 acres
From City: 0 nautical miles SE of Gardiner, NY
County/Parish: Ulster, NY
Airport Operations:
Airport Use: Private
Activiation Date: 8/1/1945 12:00:00 AM
Sectional Chart: New York
Control Tower: No
ARTCC: Boston Center (ZBW)
FSS: New York Flight Service Station ()
Attendance: ALL/IREG/IREG
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Landing Fee: No
Communications:
Unicom: 122.975
Services:
Airframe Repair: None
Power Plant Repair: None
Runway Information:
Runway: 12/30
Dimensions: 2400 x 20 ft.
Surface: Gravel-oiled, soil cement or lime stabilized
Runway 12 Runway 30
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Blue Sky Entertainment Corp

Gardiner, NY 12525
914-255-9538
Manager: The Ranch
Box 121
Gardiner, NY 12525
914-255-9538
Sectional:
Remarks:
  • HEAVY SKYDIVING ACTIVITIES ON WEEKENDS AND WEEKDAYS MAY-OCTOBER.
  • AVOID COTTAGES AT EAST END OF RUNWAY WHILE ON FINAL FOR RWY 30.
  • SURFACE OF RWY IS TAR & STONE.
  • VFR USE ONLY.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.