1NC6 - Arant, Wingate, NC
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 1NC6
Latitude/Longitude: 35-03-21.5360N / 080-27-00.2350W
35.0558 / -80.45
Elevation: 535 feet MSL (Estimated)
Magnetic Variation: 05W (1985)
Land Area Covered: acres
From City: 4 nautical miles N of Wingate, NC
County/Parish: Union, NC
Airport Operations:
Airport Use: Private
Activiation Date: 12/1/1980 12:00:00 AM
Sectional Chart: Charlotte
Control Tower: No
ARTCC: Atlanta Center (ZTL)
FSS: Raleigh Flight Service Station ()
Attendance: ALL/ALL/0700-2100
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Landing Fee: No
Communications:
Unicom: 122.8
Services:
Runway Information:
Runway: 15/33
Dimensions: 2800 x 70 ft.
Surface: Grass, sod
Runway 15 Runway 33
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Charles Arant
3200 Austin Chaney Rd
Monroe, NC 28110
(704) 681-6003
Manager: Charles Arant
3202 Austin Chaney Rd
Monroe, NC 28110
(704) 681-6004
Sectional:
Remarks:
  • PPR FOR ARPT USE. CTC OWNER AT 122.8 OR CALL 704-681-6004.
  • ULTRALIGHT OPNS NOT PERMITTED WITHOUT RADIOS
  • ARPT ATTENDANCE WX DEPENDENT.
  • RY 15/33 MKD BY CONES WITH BAND REFLECTORS.
  • VFR; PRIVATE USE.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.