01NH - Moore Airfield, Canaan, NH
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 01NH
Latitude/Longitude: 43-38-40.2600N / 072-05-13.3100W
43.6444 / -72.0869
Elevation: 835 feet MSL (Estimated)
Magnetic Variation: 16W (1995)
Land Area Covered: acres
From City: 4 nautical miles W of Canaan, NH
County/Parish: Grafton, NH
Airport Operations:
Airport Use: Private
Activiation Date: 5/1/1999 12:00:00 AM
Sectional Chart: New York
Control Tower: No
ARTCC: Boston Center (ZBW)
FSS: Burlington Flight Service Station ()
Attendance: UNATNDD
Wind Indicator:
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 17/35
Dimensions: 600 x 100 ft.
Surface: Grass, sod
Runway 17 Runway 35
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Right
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Moore Family Trust
115 South Road
West Canaan, NH 03741
603-632-4751
Manager: Walter J. Moore, Jr.
115 South Road
West Canaan, NH 03741
603-632-4751
Sectional:
Remarks:
  • NO OVERFLIGHT OVER HIGH SCHOOL 1/2 MI WNW OF ARPT.
  • 100 FT TREES ALL QUADRANTS.
  • RESTRICTED. PRIOR PERMISSION REQ. UNLESS EMERGENCY LANDING.
  • PRVDD VFR, AVOID MASCOMA VALLEY HIGH SCHOOL 1/2 MILE NW OF ARPT; ALL USERS NOTIFIED OF TWO CONDITONS.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.