N26 - Derby Aerodrome, Pinehurst, NC
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: N26
Latitude/Longitude: 35-08-02.0000N / 079-37-48.0000W
35.1339 / -79.63
Elevation: 516 feet MSL (Estimated)
Magnetic Variation: ()
Land Area Covered: 26 acres
From City: 9 nautical miles WSW of Pinehurst, NC
County/Parish: Richmond, NC
Airport Operations:
Airport Use: Public
Activiation Date: 2/1/2015 12:00:00 AM
Sectional Chart: Charlotte
Control Tower: No
ARTCC: Washington Center (ZDC)
FSS: Raleigh Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
CTAF: 122.9
Services:
Fuel available: MOGAS
Runway Information:
Runway: 05/23
Dimensions: 2600 x 60 ft.
Surface: Grass, sod - in good condition
Runway 05 Runway 23
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: None Markings: None
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Derby Aerodrome, Llc.
60 Ferguson Rd
Pinehurst, NC 28374
(815) 238-5026
Manager: Charles Peterson
60 Ferguson Rd
Pinehurst, NC 28374
815-451-0347
Sectional:
Remarks:
  • ARPT PHYS ADDRESS: 2054 DERBY RD. ELERBE, NC 28338
  • LARRY GEBLER PHONE 815-238-5026
  • RY 5/23 MKD WITH YELLOW CONES
  • MOGAS AVAILABLE WITH PRIOR SCHEDULING WITH MGR.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.