MD61 -
Lynch'S Landing,
Rising Sun, MD
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
|
|
Location:
FAA Identifier:
|
MD61 |
Latitude/Longitude:
|
39-43-28.3900N / 076-04-13.8160W 39.7245 / -76.0703
|
Elevation:
|
510 feet MSL (Estimated) |
Magnetic Variation:
|
11W (1985)
|
Land Area Covered:
|
acres
|
From City:
|
2 nautical miles N of Rising Sun, MD
|
County/Parish:
|
Chester, PA
|
 |
|
|
Airport Operations:
Airport Use:
|
Private
|
Activiation Date:
|
11/1/1976 12:00:00 AM
|
Sectional Chart:
|
Washington
|
Control Tower:
|
No
|
ARTCC:
|
New York Center (ZNY)
|
FSS:
|
Millville Flight Service Station ()
|
Attendance:
|
UNATNDD
|
Wind Indicator:
|
Yes
|
Segmented Circle:
|
No
|
Lights:
|
|
Beacon:
|
|
Landing Fee:
|
No
|
 |
|
|
Runway Information:
Runway: |
06/24 |
Dimensions:
|
1200 x 100 ft. |
Surface:
|
Grass, sod |
 |
|
 |
Runway 06 |
 |
Runway 24 |
Latitude: |
|
Latitude: |
|
Longitude: |
|
Longitude: |
|
Elevation: |
ft. |
Elevation: |
ft. |
Traffic Pattern: |
Left |
Traffic Pattern: |
Left |
Displaced Threshold: |
No |
Displaced Threshold: |
No |
Markings: |
|
Markings: |
|
 |
|
 |
|
|
Airport Ownership and Management:
Ownership:
|
Privately Owned |
Owner:
|
John M. Lynch, Jr. 326 Red Pump Rd Nottingham, PA 19362 215-932-3851
|
Manager:
|
John M. Lynch, Jr. 326 Red Pump Rd Nottingham, PA 19362 215-932-3851
|
 |
|
|
Remarks:
- PROVIDED ONLY VFR OPERATIONS ARE CONDUCTED.
|
|
FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable
for any financial loss, damages or injury due the use of, or reference
to the information displayed above. Always call ahead to
confirm any information listed and the existence of the destination.
Any information displayed may not be accurate or current and should
not be considered valid for navigation, flight planning, or for use in flight.
Please consult official publications for current and correct information.
Please read our Disclaimer.
|
|