99F - El Reno, El Reno, OK
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 99F
Latitude/Longitude: 35-31-00.1870N / 097-58-46.1790W
35.5167 / -97.9795
Elevation: 1395 feet MSL (Estimated)
Magnetic Variation: 07E (1985)
Land Area Covered: 10 acres
From City: 2 nautical miles SW of El Reno, OK
County/Parish: Canadian, OK
Airport Operations:
Airport Use: Public
Activiation Date: 2/1/1945 12:00:00 AM
Sectional Chart: Dallas-Ft Worth
Control Tower: No
ARTCC: Fort Worth Center (ZFW)
FSS: Mc Alester Flight Service Station ()
Attendance: ALL/MON-FRI/0800-1700
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Landing Fee: No
Communications:
CTAF: 122.9
Services:
Airframe Repair: None
Power Plant Repair: None
Bottled oxygen: None
Bulk oxygen: None
Runway Information:
Runway: 17/35
Dimensions: 2600 x 100 ft.
Surface: Grass, sod - in fair condition
Runway 17 Runway 35
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Right Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Marshall Gibson
1821 W Elm
El Reno, OK 73036
405-262-4880
Manager: Marshall Gibson
P O Box 880
El Reno, OK 73036
405-262-4880
Sectional:
Remarks:
  • AND MARK GIBSON.
  • AND J. MARSHALL GIBSON AVIATION PRES.
  • PRE-DATES THE ACT.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.