96CO - Logan, Bennet, CO
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 96CO
Latitude/Longitude: 39-51-23.1600N / 104-23-45.7200W
39.8564 / -104.3958
Elevation: 5300 feet MSL (Estimated)
Magnetic Variation: 11E (1995)
Land Area Covered: 80 acres
From City: 7 nautical miles NE of Bennet, CO
County/Parish: Adams, CO
Airport Operations:
Airport Use: Private
Activiation Date: 5/1/2000 12:00:00 AM
Sectional Chart: Denver
Control Tower: No
ARTCC: Denver Center (ZDV)
FSS: Denver Flight Service Station ()
Attendance: Continuous
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 08/26
Dimensions: 1200 x 100 ft.
Surface: Grass, sod
Runway 08 Runway 26
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway: 17/35
Dimensions: 2400 x 100 ft.
Surface: Grass, sod
Runway 17 Runway 35
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Right Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Steve & Ruth Nelson
50415 E 88th Ave
Bennett, CO 80102
303-644-4757
Manager: Steve Nelson
50415 E 88th Ave
Bennett, CO 80102
303-644-4757
Sectional:
Remarks:

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.