39OK - Paradise Air Haven, Goldsby, OK
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 39OK
Latitude/Longitude: 35-06-41.3400N / 097-28-45.3100W
35.1114 / -97.4792
Elevation: 1205 feet MSL (Estimated)
Magnetic Variation: 07E (1985)
Land Area Covered: 100 acres
From City: 2 nautical miles S of Goldsby, OK
County/Parish: Mc Clain, OK
Airport Operations:
Airport Use: Private
Activiation Date: 8/1/1985 12:00:00 AM
Sectional Chart: Dallas-Ft Worth
Control Tower: No
ARTCC: Fort Worth Center (ZFW)
FSS: Mc Alester Flight Service Station ()
Attendance: Continuous
Wind Indicator: Yes
Segmented Circle: No
Lights: See Rmk
Beacon: White-Green (lighted land airport)
Communications:
Unicom: 122.95
Services:
Runway Information:
Runway: 17/35
Dimensions: 4000 x 150 ft.
Surface: Grass, sod
Runway Edge Lights: Low intensity
Runway 17 Runway 35
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Right
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Paradise Air Haven Homeowners Assn
27275 St Hwy 74
Washington, OK 73093
405-288-6700
Manager: Charles Wood
27275 St Hwy 74
Washington, OK 73093
405-288-6700
Sectional:
Remarks:
  • OBSTN LGT IS OFTEN INOP.
  • ACTVT LIRL RY 17/35 - 122.9.
  • FOR ROTG BCN CALL 405-288-6700.
  • VFR USE ONLY; COORDINATE ATP WITH HUTTON; PACER; FLYING A; & PERRY ARPTS.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.