28OK -
Pellar Farm,
El Reno, OK
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
|
|
Location:
FAA Identifier:
|
28OK |
Latitude/Longitude:
|
35-30-10.1870N / 098-02-26.1850W 35.5028 / -98.0405
|
Elevation:
|
1400 feet MSL (Estimated) |
Magnetic Variation:
|
07E (1985)
|
Land Area Covered:
|
acres
|
From City:
|
4 nautical miles W of El Reno, OK
|
County/Parish:
|
Canadian, OK
|
 |
|
|
Airport Operations:
Airport Use:
|
Private
|
Activiation Date:
|
11/1/1983 12:00:00 AM
|
Sectional Chart:
|
Dallas-Ft Worth
|
Control Tower:
|
No
|
ARTCC:
|
Fort Worth Center (ZFW)
|
FSS:
|
Mc Alester Flight Service Station ()
|
Attendance:
|
UNATNDD
|
Wind Indicator:
|
Yes
|
Segmented Circle:
|
No
|
Lights:
|
|
Beacon:
|
|
 |
|
|
Runway Information:
Runway: |
17/35 |
Dimensions:
|
2300 x 125 ft. |
Surface:
|
Grass, sod |
 |
|
 |
Runway 17 |
 |
Runway 35 |
Latitude: |
|
Latitude: |
|
Longitude: |
|
Longitude: |
|
Elevation: |
ft. |
Elevation: |
ft. |
Traffic Pattern: |
Left |
Traffic Pattern: |
Right |
Displaced Threshold: |
No |
Displaced Threshold: |
No |
Markings: |
|
Markings: |
|
 |
|
 |
|
|
Airport Ownership and Management:
Ownership:
|
Privately Owned |
Owner:
|
Larry G. Pellar 7230 Smith Rd W El Reno, OK 73036 405-262-4433
|
Manager:
|
Larry G. Pellar 7230 Smith Rd W El Reno, OK 73036 405-262-4433
|
 |
|
|
Remarks:
- POND ON NORTH END OF RWY 17/35.
- PERSONAL USE ONLY; AGREEMENT WITH BRANDLEY ARPT TO SHARE THE SAME AIRSPACE.
|
|
FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable
for any financial loss, damages or injury due the use of, or reference
to the information displayed above. Always call ahead to
confirm any information listed and the existence of the destination.
Any information displayed may not be accurate or current and should
not be considered valid for navigation, flight planning, or for use in flight.
Please consult official publications for current and correct information.
Please read our Disclaimer.
|
|