VA93 - Ayers, Columbia Furnace, VA
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: VA93
Latitude/Longitude: 38-54-18.3990N / 078-39-17.0550W
38.905 / -78.6547
Elevation: 1340 feet MSL (Estimated)
Magnetic Variation: 08W (1985)
Land Area Covered: acres
From City: 2 nautical miles NW of Columbia Furnace, VA
County/Parish: Shenandoah, VA
Airport Operations:
Airport Use: Private
Activiation Date: 3/1/1990 12:00:00 AM
Sectional Chart: Washington
Control Tower: No
ARTCC: Washington Center (ZDC)
FSS: Leesburg Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 01/19
Dimensions: 2100 x 100 ft.
Surface: Grass, sod
Runway 01 Runway 19
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway: 16/34
Dimensions: 1500 x 60 ft.
Surface: Grass, sod
Runway 16 Runway 34
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: John T. Ayers
115 Lou Jake Lane
Edinburg, VA 22824
540-984-8357
Manager:


540-984-8357
Sectional:
Remarks:
  • OWNER DESIRES ARPT NOT BE CHARTED.
  • PRVDD VFR.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.