MT53 - Carson Field, Kalispell, MT
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: MT53
Latitude/Longitude: 48-05-40.8280N / 114-51-05.5000W
48.0944 / -114.8514
Elevation: 3550 feet MSL (Estimated)
Magnetic Variation: 19E (1985)
Land Area Covered: 34 acres
From City: 22 nautical miles SW of Kalispell, MT
County/Parish: Flathead, MT
Airport Operations:
Airport Use: Private
Activiation Date: 8/1/1985 12:00:00 AM
Sectional Chart: Great Falls
Control Tower: No
ARTCC: Salt Lake City Center (ZLC)
FSS: Great Falls Flight Service Station ()
Attendance: APR-NOV/ALL/ALL, DEC-MAR/SAT-SUN/ALL
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Landing Fee: No
Communications:
Services:
Fuel available: MOGAS
Runway Information:
Runway: 12/30
Dimensions: 3650 x 24 ft.
Surface: Asphalt - in poor conditionortland cement concrete
Runway 12 Runway 30
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Lost Prairie Airstrip Inc.
3175 Lower Lost Prairie Rd.
Marion, MT 59925
406-858-2493
Manager: Fred Sand
3175 Lower Lost Prairie Rd.
Marion, MT 59925
406-858-2493
Sectional:
Remarks:
  • SPORT PAJA ON ARPT.
  • MULTICOM FREQ 122.900.
  • FILED FOR RECORD PURPOSES ONLY.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.