7M0 - Mc Crory/morton, Mc Crory, AR
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 7M0
Latitude/Longitude: 35-13-42.3000N / 091-05-35.4000W
35.2284 / -91.093
Elevation: 222 feet MSL (Surveyed)
Magnetic Variation: 03E (1985)
Land Area Covered: 17 acres
From City: 6 nautical miles SE of Mc Crory, AR
County/Parish: Woodruff, AR
Airport Operations:
Airport Use: Public
Activiation Date: 6/1/1964 12:00:00 AM
Sectional Chart: Memphis
Control Tower: No
ARTCC: Memphis Center (ZME)
FSS: Jonesboro Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Landing Fee: No
Communications:
CTAF: 122.9
Services:
Airframe Repair: None
Power Plant Repair: None
Bottled oxygen: None
Bulk oxygen: None
Runway Information:
Runway: 18/36
Dimensions: 2400 x 20 ft.
Surface: Asphalt - in good condition
Runway 18 Runway 36
Latitude: 35-13-54.1900N Latitude: 35-13-30.4500N
Longitude: 091-05-35.1300W Longitude: 091-05-35.6600W
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: G.L. Morris & I.N. Arnof
P.O. Box 750
Mc Crory, AR 72101
870-731-2218
Manager: Marty Reynolds
Reynolds Flying Svc 9358 Hwy 269
Mc Crory, AR 72101
(870) 457-2069
Sectional:
Remarks:
  • PRE-DATES THE ACT.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.