3KS5 - High Point, Valley Center, KS
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 3KS5
Latitude/Longitude: 37-50-33.5150N / 097-21-04.9700W
37.8425 / -97.3511
Elevation: 1395 feet MSL (Estimated)
Magnetic Variation: ()
Land Area Covered: acres
From City: 1 nautical miles NE of Valley Center, KS
County/Parish: Sedgwick, KS
Airport Operations:
Airport Use: Private
Activiation Date: 7/1/1964 12:00:00 AM
Sectional Chart: Wichita
Control Tower: No
ARTCC: Kansas City Center (ZKC)
FSS: Wichita Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights: Ss-Sr
Beacon:
Landing Fee: No
Communications:
Services:
Airframe Repair: None
Power Plant Repair: None
Runway Information:
Runway: 17/35
Dimensions: 2400 x 100 ft.
Surface: Grass, sod
Runway Edge Lights: Low intensity
Runway 17 Runway 35
Latitude: 37-50-45.3800N Latitude: 37-50-21.6500N
Longitude: 097-21-05.0000W Longitude: 097-21-04.9400W
Elevation: 13695 ft. Elevation: 1386 ft.
Traffic Pattern: Left Traffic Pattern: Right
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: High Point Air Park, Inc
8946 N Seneca
Valley Center, KS 67147
(316) 755-4428
Manager: Donald Blecha
8946 N Seneca
Valley Center, KS 67147
(316) 755-4428
Sectional:
Remarks:
  • NGT LNDGS OF TRANSIENT ACFT NOT RECOMMENDED.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.