7CO3 - Buffalo Airport, Franktown, CO
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 7CO3
Latitude/Longitude: 39-18-56.0000N / 104-42-44.0000W
39.3156 / -104.7122
Elevation: 6948 feet MSL (Estimated)
Magnetic Variation: ()
Land Area Covered: 10 acres
From City: 5 nautical miles N of Franktown, CO
County/Parish: Douglas, CO
Airport Operations:
Airport Use: Private
Activiation Date: 2/1/2015 12:00:00 AM
Sectional Chart: Denver
Control Tower: No
ARTCC: Denver Center (ZDV)
FSS: Denver Flight Service Station ()
Attendance:
Wind Indicator: Yes
Segmented Circle:
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 08/26
Dimensions: 1000 x 40 ft.
Surface: Grass, sod
Runway 08 Runway 26
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway: 17/35
Dimensions: 500 x 40 ft.
Surface: Grass, sod
Runway 17 Runway 35
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Roy Morgan
3505 Buffalo Pond Trail
Franktown, CO 80116
303-887-6982
Manager: Roy Morgan
3505 Buffalo Pond Trail
Franktown, CO 80116

Sectional:
Remarks:

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.