36II - Newby Landing, Brownsburg, IN
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 36II
Latitude/Longitude: 39-50-28.1550N / 086-20-54.9780W
39.8411 / -86.3483
Elevation: 878 feet MSL (Estimated)
Magnetic Variation: 02W (1990)
Land Area Covered: acres
From City: 2 nautical miles E of Brownsburg, IN
County/Parish: Hendricks, IN
Airport Operations:
Airport Use: Private
Activiation Date: 11/1/1991 12:00:00 AM
Sectional Chart: St Louis
Control Tower: No
ARTCC: Indianapolis Center (ZID)
FSS: Terre Haute Flight Service Station ()
Attendance: UNATNDD
Wind Indicator:
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 01/19
Dimensions: 1800 x 100 ft.
Surface: Grass, sod
Runway 01 Runway 19
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Right
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Cynthia Newby
5400 N County Road 1000 East
Brownsburg, IN 46112
317-858-0561
Manager: Jay Beery
5398 N County Road 1000 East
Brownsburg, IN 46112
317-852-1989
Sectional:
Remarks:
  • PRVDD ANY OBSTRUCTIONS IN RY APCH SLOPE ARE REMOVED/LOWERED OR RY THR IS DISPLACED & CLEARLY MKD TO PRVDA MIN OF 20:1 APCH CLNC OVER OBSTN AREA 125 FT EITHER SIDE OF RY CNTRLN & 200 FT OFF RY BE CLEARED OF OBSTNS.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.