0WS7 - Rockdale, Rockdale, WI
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 0WS7
Latitude/Longitude: 42-58-11.7000N / 089-01-43.9000W
42.9698 / -89.0286
Elevation: 825 feet MSL (Estimated)
Magnetic Variation: ()
Land Area Covered: 10 acres
From City: 0 nautical miles of Rockdale, WI
County/Parish: Dane, WI
Airport Operations:
Airport Use: Private
Activiation Date: 4/1/2010 12:00:00 AM
Sectional Chart: Chicago
Control Tower: No
ARTCC: Chicago Center (ZAU)
FSS: Green Bay Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: No
Segmented Circle:
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 09/27
Dimensions: 900 x 130 ft.
Surface: Grass, sod
Runway 09 Runway 27
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: 600 ft. Displaced Threshold: 300 ft.
Markings: Markings:
Runway: 18/36
Dimensions: 1400 x 130 ft.
Surface: Grass, sod
Runway 18 Runway 36
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: 800 ft. Displaced Threshold: 600 ft.
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: James N. Lein
107 Merchant St
Cambridge, WI 53523
608-423-3119
Manager: James N. Lein
107 Merchant St
Cambridge, WI 53523
608-423-3119
Sectional:
Remarks:

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.