08IN - Whybrew Fld, Fortville, IN
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 08IN
Latitude/Longitude: 39-54-59.9900N / 085-50-49.5900W
39.9164 / -85.8469
Elevation: 858 feet MSL (Estimated)
Magnetic Variation: ()
Land Area Covered: acres
From City: 2 nautical miles SE of Fortville, IN
County/Parish: Hancock, IN
Airport Operations:
Airport Use: Private
Activiation Date: 8/1/2016 12:00:00 AM
Sectional Chart: St Louis
Control Tower: No
ARTCC: Indianapolis Center (ZID)
FSS: Terre Haute Flight Service Station ()
Attendance:
Wind Indicator: Yes
Segmented Circle:
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 09/27
Dimensions: 320 x 125 ft.
Surface: Grass, sod
Runway 09 Runway 27
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway: 18/36
Dimensions: 840 x 120 ft.
Surface: Grass, sod
Runway 18 Runway 36
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Paul Whybrew
2236 West 900 North
Fortville, IN 46040
317-485-7641
Manager:



Sectional:
Remarks:
  • OWNER EMAIL: FLYAPPC@GMAIL.COM

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.