T14 - Rockin M, Quinlan, TX
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: T14
Latitude/Longitude: 32-57-08.9850N / 096-05-45.2150W
32.9522 / -96.0958
Elevation: 473 feet MSL (Estimated)
Magnetic Variation: 06E (1990)
Land Area Covered: 33 acres
From City: 3 nautical miles NE of Quinlan, TX
County/Parish: Hunt, TX
Airport Operations:
Airport Use: Public
Activiation Date: 11/1/1992 12:00:00 AM
Sectional Chart: Dallas-Ft Worth
Control Tower: No
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth Flight Service Station ()
Attendance: Continuous
Wind Indicator: Yes
Segmented Circle: No
Lights: Ss-Sr
Beacon: White-Green (lighted land airport)
Communications:
CTAF: 122.9
Services:
Fuel available: MOGAS
Runway Information:
Runway: 18/36
Dimensions: 3120 x 60 ft.
Surface: Grass, sod - in good condition
Runway Edge Lights: Low intensity
Runway 18 Runway 36
Latitude: 32-57-24.4200N Latitude: 32-56-53.5500N
Longitude: 096-05-45.0400W Longitude: 096-05-45.3900W
Elevation: 470 ft. Elevation: 466 ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Walt Meziere
340 Stinson Lane
Quinlan, TX 75474
972-861-9170
Manager: Walt Lawhead
360 Stinson Lane
Quinlan, TX 75474
(972) 849-7113
Sectional:
Remarks:
  • SOLAR POWERED LIRL.
  • RY 18 & 36 THLDS AND EDGES MARKED WITH YELLOW CONES.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.