PN13 - C & W Milliron Flying Field, Sigel, PA
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: PN13
Latitude/Longitude: 41-17-14.2280N / 079-09-59.1430W
41.2872 / -79.1664
Elevation: 1700 feet MSL (Estimated)
Magnetic Variation: 09W (1990)
Land Area Covered: 75 acres
From City: 3 nautical miles NW of Sigel, PA
County/Parish: Jefferson, PA
Airport Operations:
Airport Use: Private
Activiation Date: 3/1/1994 12:00:00 AM
Sectional Chart: Detroit
Control Tower: No
ARTCC: Cleveland Center (ZOB)
FSS: Altoona Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 09/27
Dimensions: 2000 x 100 ft.
Surface: Grass, sod
Runway 09 Runway 27
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway: 12/30
Dimensions: 1550 x 100 ft.
Surface: Grass, sod
Runway 12 Runway 30
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Chester R Milliron
1027 Cathers Run Rd
Sigel, PA 15860
814-752-2550
Manager: Chester R Milliron
1027 Cathers Run Rd
Sigel, PA 15860
814-752-2550
Sectional:
Remarks:

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.