95Z - Bradley Sky-Ranch, North Pole, AK
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 95Z
Latitude/Longitude: 64-45-33.2000N / 147-23-15.5000W
64.7592 / -147.3875
Elevation: 483 feet MSL (Estimated)
Magnetic Variation: 28E (1985)
Land Area Covered: acres
From City: 1 nautical miles NW of North Pole, AK
County/Parish: Fairbanks North Star, AK
Airport Operations:
Airport Use: Public
Sectional Chart: Fairbanks
Control Tower: No
ARTCC: Anchorage Center (ZAN)
FSS: Fairbanks Flight Service Station (907-474-0788)
Attendance: ALL/ALL/DALGT
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
International Operations: No
Landing Fee: No
Communications:
Unicom: 122.8
CTAF: 122.8
Services:
Airframe Repair: Major
Power Plant Repair: Minor
Bottled oxygen: None
Bulk oxygen: None
Runway Information:
Runway: 15/33
Dimensions: 4100 x 60 ft.
Surface: Gravel-Natural soil - in fair condition
Runway 15 Runway 33
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Gradient: 0% Gradient: 0%
Traffic Pattern: Left Traffic Pattern: Right
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Bradley Brothers
3007 Goodnews Street
North Pole, AK 99705
907-488-9792
Manager: James Bradley
3007 Goodnews Street
Northpole, AK 99705
907-488-9792
Sectional:
Remarks:

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.