3WI6 - Melin Farms, Clinton, WI
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 3WI6
Latitude/Longitude: 42-35-24.5000N / 088-52-28.4000W
42.59 / -88.8745
Elevation: 885 feet MSL (Estimated)
Magnetic Variation: 01E (1995)
Land Area Covered: 5 acres
From City: 2 nautical miles N of Clinton, WI
County/Parish: Rock, WI
Airport Operations:
Airport Use: Private
Activiation Date: 3/1/1998 12:00:00 AM
Sectional Chart: Chicago
Control Tower: No
ARTCC: Chicago Center (ZAU)
FSS: Green Bay Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 05/23
Dimensions: 1500 x 50 ft.
Surface: Grass, sod
Runway 05 Runway 23
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway: 09/27
Dimensions: 1500 x 50 ft.
Surface: Grass, sod
Runway 09 Runway 27
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Mark G. Melin
8608 East Rye Drive
Clinton, WI 53525
608-676-4627
Manager: Mark G. Melin
8608 East Rye Drive
Clinton, WI 53525
608-676-4627
Sectional:
Remarks:

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.