13TX - Goatneck, Cleburne, TX
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 13TX
Latitude/Longitude: 32-09-12.2000N / 097-33-33.2000W
32.1533 / -97.5592
Elevation: 575 feet MSL (Estimated)
Magnetic Variation: ()
Land Area Covered: acres
From City: 14 nautical miles SW of Cleburne, TX
County/Parish: Johnson, TX
Airport Operations:
Airport Use: Private
Activiation Date: 3/1/2015 12:00:00 AM
Sectional Chart: Dallas-Ft Worth
Control Tower: No
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth Flight Service Station ()
Attendance:
Wind Indicator:
Segmented Circle:
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 14/32
Dimensions: 1600 x 75 ft.
Surface: Grass, sod
Runway 14 Runway 32
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Stephen B. Johnston
10036 Rock Hill Lane
Dallas, TX 75229
214-803-8349
Manager: Stephen B. Johnston
10036 Rock Hill Lane
Dallas, TX 75229
214-803-8349
Sectional:
Remarks:
  • NO OBJECTION PRVD THE USE OF THIS ARPT IS RSTR TO THE FOLLOWING: 1. DAY/VFR ONLY. 2. USE BY OWNER OR WITH OWNER'S PMSN. 3. TO PRVD A SAFE APPROACH AND CLR THE TREES ON APPROACH TO RY 32 WITH A 20:1 APPROACH SLP FOR UTILITY AND VISUAL RYS RCMD RY 32 RY E

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.